Author Topic: S12_rb20det_4wd (Read 6361 times)

EightySix200SX · « **Reply #20 on:** 02:28:24 PM / 06-Jun-10 »

This is awesome! Much luck to you this is gonna be a pretty epic car. Ill be following this thread for updates. Cheers.....

tommy · « **Reply #21 on:** 03:14:08 PM / 06-Jun-10 »

Very cool looking with the beast in it!!!

Man I really want a pit in my garage!!! so much easier to work on the suspension, you can adjust it with the normal geometry with full weight on it... makes life a lot easier!

David B · « **Reply #22 on:** 05:43:16 PM / 06-Jun-10 »

Quote from: tommy

Very cool looking with the beast in it!!!

Man I really want a pit in my garage!!! so much easier to work on the suspension, you can adjust it with the normal geometry with full weight on it... makes life a lot easier!

just jack the car up and set it on wheels..

TurboNotch · « **Reply #23 on:** 06:21:34 PM / 06-Jun-10 »

Quote from: David B

just jack the car up and set it on wheels..

ya, but thats still not as kool as a pit.

kyskater · « **Reply #24 on:** 11:11:47 AM / 08-Jun-10 »

is it just my redneck internet or are there no pics lol

Navy_Mech2 · « **Reply #25 on:** 02:52:03 PM / 08-Jun-10 »

its your redneck internet lol

Great work on the swap! this will be way cooler than that AWD B13!

celestialsilvia · « **Reply #26 on:** 12:30:07 PM / 09-Jun-10 »

sweet! whats with the welded VIN plate, or should I not ask?

kyskater · « **Reply #27 on:** 11:05:35 PM / 11-Jun-10 »

on the rwd rb20 swap were u using a stock r32 crossmember and mounts? also how was firewall clearance

Nitro · « **Reply #28 on:** 03:39:07 AM / 12-Jun-10 »

As for the VIN plate - yes, you shouldn't ask It is something about registration procedures and other stuff - it's very complicated here.
The stock R32 crossmember fitted there with some modifications:

You need to bend or cut the part of the tension rod brackets to fit:

And need to redrill one of the holes, that is closer to the front end of the car for 4 cm. The brackets is from R32

Stock VS R32:

Need to widen the hole in the crossmember mount, this one:

Also the R32 mounting brackets have long bolts, so you will have to use some washers:

The steering rack mounts is stock from FJ engine, but as far as I see it's the came as from CA

Draconis · « **Reply #29 on:** 04:06:48 AM / 12-Jun-10 »

Well, some thoughts that may help since you're already setting up your subframe and wanting to do the AWD/4x4 system as mentioned earlier.

The RBs are front sump as are the S12s. The cross-member sits behind the sump. Also, the stock RB's oil pan is a single piece, as you showed a pic of, with the front axle setup as part of it. That means, the front axles are too far forward for your stock strut towers.

The Z31s that had the RB20 (the 200ZR) had an oil pan made up for them to accommodate the fact that they are rear sump (Z31s). But that was also still designed for a RWD.

kyskater · « **Reply #30 on:** 08:56:40 PM / 12-Jun-10 »

,,, wtf any clue why i cant see pics?

Vovka · « **Reply #31 on:** 01:47:45 PM / 14-Jun-10 »

David B · « **Reply #32 on:** 01:57:16 PM / 14-Jun-10 »

my god. thats so crazy

are you gonan delete the passenger side seat? sounda like your gonna have to cut that out and build around it

nvm you could probally still run it, i didnt realize it wasnt that bad

gadget1382 · « **Reply #33 on:** 10:48:50 PM / 17-Jun-10 »

VERY IMPRESSED!

It's a big task, and an AWD S12 was something i would have loved to have built.

I can see the floor is going to need a little massage, but the fact that you have been able to dummy up the whole thing with mainly off the shelf items is GREAT!

Well done and *subscribe to thread*

BattleFairy · « **Reply #34 on:** 02:43:55 AM / 27-Jun-10 »

you dont have any problems with the swaybar?

just so set it straight

my budy use for his rwd rb20 custom mounts beside that everything was mixed together with oem parts. but he told me that he mod his oilpan cause the s12 swaybar had contact with the the oilpan

for the vin tag

sounds sooooooooooo clischee
soo in which country the s12 is stolen

just joking

Draconis · « **Reply #35 on:** 03:08:21 AM / 27-Jun-10 »

Wow, that is very well done man. Bet that wasnt a simple task at all.

Maxpow · « **Reply #36 on:** 07:36:19 PM / 28-Jun-10 »

Damn those are some tight spaces. Nice work man! This is awesome.

kyskater · « **Reply #37 on:** 11:43:00 PM / 28-Jun-10 »

god i wish the freeking pics would work for me do you have a photobucket account that you host them so i can take a look

Vovka · « **Reply #38 on:** 02:30:39 PM / 08-Aug-10 »

ÃÃ ÃªÃ«Ã®Ã ÃªÃ³Ã§Ã®Ã¢Ã Ã¢Ã°Ã®Ã¤Ã¥ Ã¢ ÃÃ®Ã°Ã¬Ã¥

Ã¯Ã°Ã®Ã¤Ã®Ã«Ã¦Ã Ã¥Ã¬ ))

Nitro · « **Reply #39 on:** 01:02:38 AM / 09-Aug-10 »

This is still a test fitment. The wheels have normal camber now, but still needs ajusting. This welding is for testing purposes only.