A few pics of my car & more to come tonight, its a 1988 ca18et 1.8 zx turbo, at the moment it is near standard, it has the poppet valve blamked off, 1" plug fitted, my exhaust is a stainless custom made 2.75" diameter from the turbo back to the rear silancer, it has a freeflow aftermarket cone air filter, i have a hks mushroom COPY but i find it a bit loud!
bits i have that i need to fit are:
a saab 9000 copy all-alloy intercooler sprayed matt black to tidy it up
dump valve
MBC boost controller, it is a ball & spring type, cheap & cheerfull
7x14" alloys from an old lotus, hopefully they'll fit
i also have some dymag 7.5x17" et42 i think???? not 100% on the offset really
avo 35mm lower springs are on order
Tow bar to make jacking the car up a little easier
i need a t25g in working/ready to fit order
my aims for the car are not too mad! its my daily driver at the end of the day & it'll have to tow my drag race austin mini turbo 5-8 times a year!
i'd like to get as much power as possible without changing too much in the ignition & fueling from standard but.....i'm mulling over megasquirt but i need to get info on it!
plus i'll need to weld my sills before march & genurally tidy thecar up as its due a good check over from top to toe!
anyone that can advise me where to go with my modifcations would really help as i'm only really familier with old distrabutors & carbuetters & NEW to efi! so help is needed
not really understanding how to add pics etc at the moment anyway i hope you all like
at present it runs sweet as when warm but starting from cold is fie minutes of cranking! i think its the choke however that works on these cars??????
i have disconnected the temp sensor as can be seen in the engine pic above, its wrapped in white tape in the pic to highlight it!
it needs lowering badly!!!! & they are a bit softly sprung as standard or maybe i need to get used to it!
i tink the AVO springs i have on order are a little stiffer
other than that i really like the s12, the only other rear wheel drive car i've owed & liked is an mx5 but the silvia is defo getting my vote!
i want to go to ireland in it in march so i'll be preparing it & hopefully making it reliable enough to do the trip there & back which from where i live is around 600-700miles depending on how much i drive over there!
Reconnect your temp sensor, you'll only throw the ECU into safe mode and make it run funny by doing that. Did you check the response I left in your other thread? thats probably the issue. If its not too expensive, probably wouldn't hurt to swap the coolant temp sensor with a new Nissan one, I prefer factory OEM sensors if you are going to do it.
Otherwise looks good! You must post up some pics of your Mini, I absolutely love those things!
just reading through that post now 200sxkitcar!!! i'll connect the temp sensor back up asap, i'm sure temp sensors are still cheap enough, they look simular to the bosch type?
heres a link to my mini build!
http://www.turbominis.co.uk/forums/index.p...t&tid=10121 (http://www.turbominis.co.uk/forums/index.php?p=vt&tid=10121)
some good chaps on that site!
i cant figure out how to pop my other pics up i have url's for them
just checked out that article 200sxkitcar, i'll be checking that component!
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image194.jpg)
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image193.jpg)
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image226.jpg)
been checking out asparagus's thread on his car, i agree its the shit, taking no prisoners with that suspesion setup LOW
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image200.jpg)
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image220.jpg)
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image205.jpg)
As can be seen in the pics i need t lower my car "badly"
my rims, i hope thy fit
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/n598942754_1711418_3824.jpg)
my broken turbo outlet pipe
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image232.jpg)
my dizzy, is that the cps with the 3 wires on it???
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image225.jpg)
engine bay, i've took the cowling around the radiator off since, i have some tube too put my dump-valve on the intake (grey/silver)
pipe(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image226-1.jpg)
my drive home 200+miles & my fther in his van following 55mph all the way, excuse the song plying th stock radio is stuck on one radio station lol
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/th_Video009.jpg) (http://s428.photobucket.com/albums/qq8/s12midlandsuk/?action=view¤t=Video009.flv)
got some nice styling idea's for my rear lights & front indicators! interiour of mine is staying stock apart from a decent stereo & getting rid of trim rattles & giving it a good valet!
i also have some oldschool 1976 performance 5 spoke alloys, black spokes with a polished rim, my tyresare 185/60/14's
i need to add a short shifter or modify the stock one as it has quite a a long through!
i'm collecting my springs this week woohoo!
styling wise i hope my car will look fairly simular to either of these s12's
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/4134s123_002.jpg)
& asparagus's
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/d38dd57e.jpg)
(http://i187.photobucket.com/albums/x167/mod_s12/100_1923.jpg)
if i can get mine anywhere close tt the stance of these s12's i'llbe happy
Quote from: s12midlandsuk
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/Image226.jpg)
I still say that intercooler is a bad idea. PLastic endtanks = fail.
Quotebeen checking out asparagus's thread on his car, i agree its the shit, taking no prisoners with that suspesion setup LOW
As can be seen in the pics i need t lower my car "badly"
S13 front knuckle/spindle can be run and that lets you use S13 front coilovers. For the rear you need something different, look around on here in the Suspension section, the answers are there.
Quotemy rims, i hope thy fit
(http://i428.photobucket.com/albums/qq8/s12midlandsuk/n598942754_1711418_3824.jpg)
WOW I really like those.... What did you get them off of? they look a little like S12 SE wheels:
(http://www.v6-s12.com/images/SEV6Gallery/Timothy_OShaughnessy_88_SE.jpg)
my rims are off an old LOTUS excel, not sure if they were sold in america, i chose them being a lotus OE rims so i know its strong & they look pretty cool!
i like the rims asparagus has (which set, any set) the low stance a dished rims i really like, i like the boso influance!!! rims like that are hard to get in the uk & cost Ã,£Ã,£Ã,£Ã,£Ã,£
i've been fidling with the car & i think it is the air regulator that has stuck, off to by carb cleaner & other bits, see if i csn order a new air regulator
my next pics i post will be lowered on the rims hopefully! & a couple of styling changes
oh yeah! a question, my car is my daily driver so being reliable is 1st & foremost!
should i weld the diff??? so i can drift more easily & have better tracktion off the line at the strip????
i know an lsd frm a s13/14/15 not sure which fits in the s12 housing but Ã,£Ã,£Ã,£Ã,£ is tight at the moment
should i or should'nt i weld the diff??????????
Quote from: Arro
(http://www.v6-s12.com/images/SEV6Gallery/Timothy_OShaughnessy_88_SE.jpg)
I swear this picture is THE most whored around S12 picture by non-s12ers.
My car is even lower now, i want my car to be lower every time i look at it.
keep it up!!
I say WELD THE DIFF! Never never never never buy a *used* VLSD.
Looks GREAT man! dig the crazy lotus rims!
The crank angle sensor is very likely what you've got in the dizzy there, I've not actually seen a CA18ET with only the 4 plugs like that, so I don't know exactly what EFI/ECCS system they run.
The first closeup pic you have there is the air regulator that I had posted that link to for diagnosis.
keep us updated
i've just been reading about solid mounting the rear beam & diff mount! that & a one piece prop are definately on the cards next summer!!!! i can make the beam mount/diff mounts no probs but i'll have the prop made!
why is a 2nd-hand vlsd so bad arro???? just quizzing for info really
i dont know if you have the car over there but in the uk we have a lil-hatchbk called the nissan micra, i cant get new rockers/sills to weld on over here so i'm using some from a nissan micra, i've modified them a lil but they fit!!!!
just need to get the weather so i can cut & weld my new sills/rockers on! then i'll do some rustproofing!
how do you chaps fit lexan rear windows to the hatch??? as the stock glass has alot of curves or do you have them made?????
i'll be removing my rear wiper too soon, it makes no differance being there to me, aircon will be binned also!
hope to have a pic update fairly soon, great info on here guys, read about alot of cars/projects & i'm suprised u guys also suffer the rust bug!
has anyone sorted a lsd that is an easy swap into the s12v yet? i'd love an lsd be it a clutch type or viscous but unsure where to start! i'm a bit confused with ifo really, subaru??? can this be used? s13/s14 vlsd, older datsun 240/60/80Z lsd there seems so many cars with the same rear diff that something factory should fit, or is it the driveshafts that are the issue??????
the subaru looks very simular in the looks department, & plenty have vlsd's & they can take the power of our motors, well defo my ca18et turbo, anyway, mine is getting chopped springs as thats the only option i have at the moment, springs did'nt come through over here
i like the rear springs & platforms some of you guys over there use!
i'll be slotting my rear subby to sort the negative camber
the good news is for christmass i got a nice new headunit cd/mp3/with a jack for my i-pod! i have speakers for the front doors, rear 6x9's & i found some nice JDM carrozeria shelf mount speakers, i'm tinting my front & rear lights/indicators, the rears will be mostly red! & my front indicators will be smoked to blend in the the black trim of the front bumper, rear wiper is removed! i'll get some pics asap
woo hoo my car is working again so i've spalshed out on some new bits
a new mbc
some oldschool kenwood shelf speakers the type that are in there own pod! 80's stylee baby
& if it can be fitted an old one nob apexi safc!!! it only has 4 wires red/black/yellow & white
where do i wire these too????