eBay rotors

[jamesnater]

I\'m just curious, I found \"FRONT DRILLED SLOTTED ROTORS\" looking through eBay for Silvia Badges. Has anyone ever tried these out? I know eBay has some pretty crappy stuff out there that are meant to screw people over and take their money, however, I\'m just curious because I searched for \"rotorworks\" on here and found nothing. I\'ve never heard of drilled or slotted rotors for the S12.

Here\'s the link.[/a]

[old school]

not to sure...i have see sloted and crossdrilled on here once in a while but but the pic show its for 5 lug bolt patern plus the ones i have seen were brembos. plus honestly i dont trust ebay my friend ordered form there and well it was not to pretty. but if u find out it is legit go for it if u have a 5 lug on ur car.

[jamesnater]

I haven\'t bought my S12 yet, I\'m just looking for available brake upgrades. And other things to do to my S12 whenever I get it. I\'m just trying to find out what my options are by searching google, eBay, here, etc. I\'ve ordered off eBay and haven\'t had a problem, but never car stuff. I mean... there\'s so crazy stuff out there that people are selling and claiming 12 HP Gains on that thing called a tornado, which I here does NOTHING at all (otherwise you\'d see it in every Import Tuner/SuperStreet/Modified Mag/Whatever Advertisement). I wouldn\'t buy these off eBay, or those rotors at all for the matter, unless someone else has bought and used them and gives a good testimonial.

[nismo200sx16]

rotorpros has cross drilled and slotted rotor\'s for s12\'s.  [url]http://www.rotorpros.com/nissan.htm[/a] I think they have them for all model\'s of the s12. but if you are looking for a real upgrade you can swap the z32 4 pots. their are other options. if you use the s13 spindles and hubs on the s12 you can use any caliper and rotor that you can on the s13. the factory brakes suck so I would upgrade the caliper also.and you can also use the z32 master cylinder.
here\'s some pix of the z32 4 pots

[old school]

rotorpros has cross drilled and slotted rotor\'s for s12\'s.  [url]http://www.rotorpros.com/nissan.htm[/a] I think they have them for all model\'s of the s12. but if you are looking for a real upgrade you can swap the z32 4 pots. their are other options. if you use the s13 spindles and hubs on the s12 you can use any caliper and rotor that you can on the s13. the factory brakes suck so I would upgrade the caliper also.and you can also use the z32 master cylinder.
here\'s some pix of the z32 4 pots

dam thats a sick set up wow how much did it run u to do that?

[ravenS13.5]

so are you saying the z32 4pots will fit on the aftermarket s12 rotors? Or are yours s13 rotors, sorry, I\'m still foggy on this.

[nismo200sx16]

no that\'s a full z32 brake conversion. I actually found the kit on ebay. it came with the brembo rotors, conversion brake lines,metal master pads, and the powder coated rotors. I think the whole kit was around $400. they were selling it for the s13 but I am using s13 spindles and hubs on the s12 control arm. so its all a direct bolt on.

[Keith]

KVR performance sells Brembo cross drilled rotors for the S12....front and rear.  OE size.........  [url]www.kvrperformance.com[/a]

\'84-\'88 ca20/ca18; Front- NI425
                          Rear-   NI430

\'87-\'88 vg30; Front- NI435
                   Rear-  NI437

Think I paid around $65 each for mine a few years ago.