I Thought I Had Vg Pistons..

[BoostedVG]

I bought a set of forged pistons from ebay a while back and now I find that they're not for a vg like I thought. They are the correct bore but the wrist pin is a little bigger and the placement is wrong...at top dead center they will stick up out of the block about a 1/4" to 3/8". All I know is that they are nissan pistons with 2 valve releifs that were built for electromotive. So my question is what motors did nissan make that were 2 valve per cylinder with a 87mm bore and did nissan make all vg 30 with the same rod length. Any help will be greatly appreciated.

[Xenonxiii]

http://www.xenonz31.com/General_Info/W-Series/w-series.html

You have the later style Pistons. see link above.

[Spooled]

Wrong - the rods in the W-series motors were still the same length as those in the non W.  The pin height did not change either.  Therefore, these pistons would still stick out of the block - W-series or not.