Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: A Little Project I Did A While Back  (Read 2832 times)

Offline bartc_j

  • Questionable Seller/BUYER BEWARE
  • S12 Guru
  • *****
  • Location: boise, idaho
  • Posts: 10,725
    • http://members.cardomain.com/bartc_2
A Little Project I Did A While Back
« on: 11:10:28 PM / 08-Feb-08 »
hers a cool little setup i did for a buddies 93 325is bimmer... man this was a pita to make the manifolds and fit all the piping all on one side, and on top of that the motor is tilted  toward the exhaust side..

motor was basically stock minus
-forged pistons
-arp headstuds
-cometic headgasket

turbos wher big t28 of a r34 they are the ceramic turbine wheel units

my buddy moved before we had time to finish all the cosmetic parts of the install...enjoy









Facebook Share    

Bart
 '86 1.8L Turbo

Offline IggyEGuana

  • Builder - Driver
  • S12 Guru
  • *****
  • Location: Hawthorne, California, USA
  • Posts: 3,754
A Little Project I Did A While Back
« Reply #1 on: 11:20:26 PM / 08-Feb-08 »
SIIIIIICK!  What did you do with the wastegate exits?  You can just end them like that or do you have to make like a mini exhaust system for them?
« Last Edit: 11:21:27 PM / 08-Feb-08 by IggyEGuana »

Waylon Deno - Silhouette Autosports (check it out on facebook)
Drift Build Thread
Quote from: Arro
you sir are emblazoned with win.

Offline bartc_j

  • Questionable Seller/BUYER BEWARE
  • S12 Guru
  • *****
  • Location: boise, idaho
  • Posts: 10,725
    • http://members.cardomain.com/bartc_2
A Little Project I Did A While Back
« Reply #2 on: 11:24:46 PM / 08-Feb-08 »
Quote from: IggyEGuana
SIIIIIICK!  What did you do with the wastegate exits?  You can just end them like that or do you have to make like a mini exhaust system for them?

nope its called o2 dump doing it this way actually nets you 10-30hp since your not creating extra turbulance in the exhaust.. plus it sounds sick
Bart
 '86 1.8L Turbo

Offline Keith

  • Honored Veterans
  • S12 Guru
  • *****
  • Location: B-ham, AL
  • Posts: 5,970
    • http://www.cardomain.com/id/1984rps12
A Little Project I Did A While Back
« Reply #3 on: 04:25:05 PM / 09-Feb-08 »
Quote from: bartc_j
plus it sounds sick
Yeah...I agree...it sounds sweet.  When I was at my local dyno a while back there was a guy with an IS300 that had an 02 dump.......and holy christ, it scared the piss out of me when he hit boost on his first pull.  I think he was laying down 450+



*1984 S12 Turbo* CA18DET swap * Custom top mount header & dump pipe * Mitsu Heavy Industries EVO III 16g turbo * Custom 3" turbo back exhaust with Magnaflow muffler * Front mount intercooler * Front mount oil cooler * Nismo fuel pressure regulator * Walbro 255 * DSM 450cc Injestors * Apexi Safc II * AEM Wide Band * AEM Tru Boost * Z32 MAF * Cometic head gasket * Centerforce Dual Friction clutch *  Tokico lowering springs * Owned since 1989 *

*2007 BMW M6* S85 V10 sweetness

*2004 C5 Z06*

*2006 BMW E60 550i Sport* Boner stock; SOLD *

*1995 Maxima* Owned since 1995 SOLD

Car Domain

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
A Little Project I Did A While Back
« Reply #4 on: 04:34:02 PM / 09-Feb-08 »
that is one sick set-up man seems like you know your shit

Offline bartc_j

  • Questionable Seller/BUYER BEWARE
  • S12 Guru
  • *****
  • Location: boise, idaho
  • Posts: 10,725
    • http://members.cardomain.com/bartc_2
A Little Project I Did A While Back
« Reply #5 on: 06:08:59 PM / 09-Feb-08 »
thanks... it was a pita but fun when i got it done
Bart
 '86 1.8L Turbo

Offline bartc_j

  • Questionable Seller/BUYER BEWARE
  • S12 Guru
  • *****
  • Location: boise, idaho
  • Posts: 10,725
    • http://members.cardomain.com/bartc_2
A Little Project I Did A While Back
« Reply #6 on: 09:57:37 PM / 09-Feb-08 »
forgot to mention we had aem ems for the brains....
Bart
 '86 1.8L Turbo

Offline Redneck

A Little Project I Did A While Back
« Reply #7 on: 10:46:12 PM / 09-Feb-08 »
Wow...good job. Thats a nice setup.
FIrst my rims are horrible, than there ok when painted black , now my cars horrible, now my fenders are to much after i was told i couldnt do it.... Lol club s12 ftw.....  Only here have Ive been told they look like shit..... SOrry its not bone stock with crown vic rims running the stock vg making 130whp and looks generic like every other one. My car looks dope ive been told this a billion times on local forums....


Offline firestarter

  • Full Member
  • ***
  • Location: Edmonton, Alberta, Canada
  • Posts: 114
    • http://
A Little Project I Did A While Back
« Reply #8 on: 10:57:29 PM / 09-Feb-08 »
Quote from: bartc_j
forgot to mention we had aem ems for the brains....



ahh, I was just about to ask, as I didnt see any maf! I used to rock the wastegate dumped to atmosphere in my GTI but it was far to much of a heat score, good looking project!!
question-"so why did you get an S12??"
Answer-"cause Corvette owners used to hate being molested by my GTI, now that the C6 Z06 is out, I wanted RWD, plus I'm cheap!!"

Offline Nemisis

  • S12 Guru
  • *****
  • Location: Racine, Wisconsin
  • Posts: 2,747
A Little Project I Did A While Back
« Reply #9 on: 09:18:03 PM / 10-Feb-08 »
DUDE!!!! TOTALLY JAWSOME!!!!

If you could manage a TT setup like that, with the strut tower in the way of mounting shit, a VG30ETT should be no sweat!


If you get more power from a divorced dump, I want one for my Bug! Its gonna need all the power I can squeeze out of it. Any chance I could get one for my T25? Just like the flange with some short pipes on it to start from.


That shit is off the hook.


Bartco FTMFW!!!
« Last Edit: 09:20:35 PM / 10-Feb-08 by Nemisis »
May she rest in peace 07-12-06
1984 Nissan Silvia RS12 CA18ET


~~~~~~~~~~~~~~~~~~~~~~~
1992 Dodge Colt (Mitsubishi Mirage) Daily beater- 4 speed stick, needs some rust repair- project abandon, must sell due to reliability issues. $500 takes the car and a bunch of goodies

1973 Volkswagen Super Beetle- Runs and drives perfect. Needs new drums all around and a speedo cable.

2007 Honda Ruckus- Awaiting funds for a 150cc GY6 motor swap, then probably gonna do a VW GTi K04 turbo conversion. ~put on hold for yet another year~

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
A Little Project I Did A While Back
« Reply #10 on: 02:29:37 AM / 11-Feb-08 »
Quote from: Nemisis
DUDE!!!! TOTALLY JAWSOME!!!!
Bartco FTMFW!!!


x's eleventy billion

Offline Nemisis

  • S12 Guru
  • *****
  • Location: Racine, Wisconsin
  • Posts: 2,747
A Little Project I Did A While Back
« Reply #11 on: 04:57:02 PM / 11-Feb-08 »
Quote from: sideways_s12
x's eleventy billion


word.


I see the college math classes are finally paying off!
May she rest in peace 07-12-06
1984 Nissan Silvia RS12 CA18ET


~~~~~~~~~~~~~~~~~~~~~~~
1992 Dodge Colt (Mitsubishi Mirage) Daily beater- 4 speed stick, needs some rust repair- project abandon, must sell due to reliability issues. $500 takes the car and a bunch of goodies

1973 Volkswagen Super Beetle- Runs and drives perfect. Needs new drums all around and a speedo cable.

2007 Honda Ruckus- Awaiting funds for a 150cc GY6 motor swap, then probably gonna do a VW GTi K04 turbo conversion. ~put on hold for yet another year~

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
A Little Project I Did A While Back
« Reply #12 on: 05:20:41 PM / 11-Feb-08 »
^ROFL

Ok, now I want EVERYONE to PM Bart to CLEAN HIS GARAGE!

Today he made the mistake of telling me that he was a day or so away from being done with that, and I take it that is one of the biggest things in the way of him getting back to making shit.

Sorry Bart  You know I'm ruthless like that
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline bartc_j

  • Questionable Seller/BUYER BEWARE
  • S12 Guru
  • *****
  • Location: boise, idaho
  • Posts: 10,725
    • http://members.cardomain.com/bartc_2
A Little Project I Did A While Back
« Reply #13 on: 07:09:26 PM / 11-Feb-08 »
i know i know i dont mind you nipping me in teh ass is a good thing...
Bart
 '86 1.8L Turbo

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
A Little Project I Did A While Back
« Reply #14 on: 10:08:19 PM / 11-Feb-08 »
don't know about the nipping in the ass thing sounds a little....nevermind lol j/k Hey Bart clean your damn garage

Offline bartc_j

  • Questionable Seller/BUYER BEWARE
  • S12 Guru
  • *****
  • Location: boise, idaho
  • Posts: 10,725
    • http://members.cardomain.com/bartc_2
A Little Project I Did A While Back
« Reply #15 on: 10:55:27 PM / 11-Feb-08 »
Quote from: sideways_s12
don't know about the nipping in the ass thing sounds a little....nevermind lol j/k Hey Bart clean your damn garage
almost there i will have my s12 in the bay no later then this weekend
Bart
 '86 1.8L Turbo