Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: TECHNICAL FORUM RULES  (Read 11618 times)

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
« on: 04:02:27 PM / 16-Jul-08 »
There are RULES to the Tech sections, and they are as follows:

1. SEARCH. If we see that your question has been asked a thousand times, and I find your answer immediately in a seach, your thread WILL BE DELETED.

2. READ. At least look at the topic titles for *a few* pages of the Tech section pertaining to your question. If we find your question is answered on the page you posted or the one before it, very likely your thread WILL BE DELETED.

3. CHOOSE. Pick the CORRECT topic section for your technical question. DO NOT post your question in "General Tech" if it is obviously covered in one of the other sections. There is no excuse for this, when the sections are VERY clearly labeled. Chances are, if you look in the proper section in the first place, you would have found your answer to begin with.

4. TITLE. Pick a proper title for your thread, that SAYS WHAT IT IS ABOUT. DO NOT ask a general question like "R200 Diff?" or "Need help!!!". Make sure your thread title TELLS US WHAT IT IS ABOUT. If it does not, your thread WILL BE DELETED.

THIS WILL BE ENFORCED in ALL the Technical sections.

Facebook Share    

-Jason Arro

'85 Nissan 200SX (KA24DE)
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from:
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance