Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: On A Quest For The 400hp Single Cam  (Read 92472 times)

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« on: 05:15:37 PM / 29-Jul-08 »
On to my build It's an 86 s12 with a ca18et power plant mods so far are:

msd coils with the dual coil mod
t25g on 7psi
3 inch exhaust from the turbo back
pov removal
and cold air intake

now on with the pics

Before:









After












mods to come:

euro cam
ported head
JE pistons and det rods
also t28 0r larger
and a standalone
also a walbro fuel pump
and bigger injectors

so there's the start of my build
« Last Edit: 02:43:46 PM / 28-May-09 by sideways_s12 »

Facebook Share    


Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
On A Quest For The 400hp Single Cam
« Reply #1 on: 05:19:38 PM / 29-Jul-08 »
Looks better with the black wheels. Get you some springs, mang! I'd do it before anything else.

And an intercooler.
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #2 on: 05:23:23 PM / 29-Jul-08 »
I got an intercooler from my black car that was givin to me.







just haven't had time to install it

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
On A Quest For The 400hp Single Cam
« Reply #3 on: 07:05:29 PM / 29-Jul-08 »
How long is it?
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #4 on: 03:11:05 AM / 31-Jul-08 »
haven't had time to measure it will do that tomarrow since with some luck and waylon's help I'll be installing it tomarrow

Offline David B

  • S12 Guru
  • *****
  • Location: NOVA (Northern VA), Manassas
  • Posts: 7,366
On A Quest For The 400hp Single Cam
« Reply #5 on: 03:16:21 AM / 31-Jul-08 »
lolitzjuschillinondacouch


caged ca20e/ka24e/sr20det/ka24de/1jzgte SRA hatch. super sick

Quote from: Arro
Goddamn David you seriously are hard core man.
Quote from: tjs91tsi
Ohh, and unless you havn't figured it out yet, Stop driving with coolant leaks and Stop dropping nails in your fucking trannys!!!

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #6 on: 03:18:36 AM / 31-Jul-08 »
yeah those are pics I took at the last minute cuz arro wanted to see it lol

Offline turbos12

  • Full Member
  • ***
  • Location: Raleigh, North carolina
  • Posts: 431
    • http://
On A Quest For The 400hp Single Cam
« Reply #7 on: 09:38:39 AM / 31-Jul-08 »
your car looks like my car  lol...my intercooler is about the same size also haha

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #8 on: 02:18:16 PM / 31-Jul-08 »
damn hell yeah it does lol do you have the se kit as well?

Offline turbos12

  • Full Member
  • ***
  • Location: Raleigh, North carolina
  • Posts: 431
    • http://
On A Quest For The 400hp Single Cam
« Reply #9 on: 06:20:33 PM / 31-Jul-08 »
nope just the turbo lip hit...but i want the se front lip haha..but so does every1 els
« Last Edit: 06:20:55 PM / 31-Jul-08 by turbos12 »

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #10 on: 05:48:52 PM / 01-Aug-08 »
I got one that I'm gonna be putting on soon tehe...

Offline IggyEGuana

  • Builder - Driver
  • S12 Guru
  • *****
  • Location: Hawthorne, California, USA
  • Posts: 3,754
On A Quest For The 400hp Single Cam
« Reply #11 on: 07:25:14 PM / 01-Aug-08 »
11psi!! mwahaha!!!

Waylon Deno - Silhouette Autosports (check it out on facebook)
Drift Build Thread
Quote from: Arro
you sir are emblazoned with win.

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
On A Quest For The 400hp Single Cam
« Reply #12 on: 08:56:11 PM / 01-Aug-08 »
11psi + no IC + no fuel management + no fuel metering = jiffy-pop pistons.

-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #13 on: 02:35:06 PM / 02-Aug-08 »
lmao!!

Offline seb.racing

  • Full Member
  • ***
  • Location: France
  • Posts: 547
On A Quest For The 400hp Single Cam
« Reply #14 on: 04:28:17 PM / 02-Aug-08 »
good job

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #15 on: 04:12:51 PM / 03-Aug-08 »
thanks  

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
On A Quest For The 400hp Single Cam
« Reply #16 on: 04:24:43 PM / 03-Aug-08 »
post that measurement on  here so I don't have to dig through cellphone text messages lol...

So when is Waylon gonna tack them into place? I'm  assuming he'll help with this...
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
On A Quest For The 400hp Single Cam
« Reply #17 on: 04:40:49 PM / 03-Aug-08 »
Quote from: Arro
post that measurement on  here so I don't have to dig through cellphone text messages lol...

So when is Waylon gonna tack them into place? I'm  assuming he'll help with this...

when we get the time and I already erased the message I sent you and don't remeber the measurements

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
On A Quest For The 400hp Single Cam
« Reply #18 on: 05:25:41 PM / 03-Aug-08 »
*doh*

ok looked at what you sent me... the core is 28x6" front, 2.5" thick.

-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline IggyEGuana

  • Builder - Driver
  • S12 Guru
  • *****
  • Location: Hawthorne, California, USA
  • Posts: 3,754
On A Quest For The 400hp Single Cam
« Reply #19 on: 10:36:05 PM / 03-Aug-08 »
Something I was just thinking of.  If the sputtering at 14-16psi is in fact detonation then wouldn't the ca18et's knock sensor detect that and go to limp mode?  Or at least throw a CEL?  Kinda dumb if all it does is kill fuel and/or spark for a brief moment and not even let us know whats wrong.

BTW guys I fiiinaaaly got a T25G.  Mayb my car will actually run soon and Jason's vette eater won't be the "fastest S12 in Vegas" anymore.  WHA!!!!!  OH SHIT!!

Waylon Deno - Silhouette Autosports (check it out on facebook)
Drift Build Thread
Quote from: Arro
you sir are emblazoned with win.