Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: My Nissan S12  (Read 4038 times)

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« on: 08:37:32 AM / 14-Oct-08 »
Hello
First of all I must say that i'm swedish so my Engelish is not so good.  

Engine:
It's going to happen a lot on the engine but not right now i want to get it some new paint and know that the chassi how i want it.
But then i will put in..
Megasquirt
Weisco pistons (1mm bigger)
Apex stakar (H-profile)
W better clutch from s13
Hughe turbo
Top mount
Intercooler
Stödgördel
Oilcooler
PPF dumpventil
PPF Wastegate
And some other stuff...

Body:
-I'm thinking about building my own bodykit but we will just have to see how mutch time it will take to get the first step ready.
-And put on a hughe wing
-Fiberglass Front fenders, hood, and trunk.

Rims:
-Rota Boost whit stretched tires.

Chassi:
-Megan racing
-S13 spindel and balljoint
-Urethan bushings

Interior:
-All stripped out.
-End then new paint here aswell and some bright and nice colours too.
-Racing seats


« Last Edit: 07:59:18 AM / 08-Nov-08 by MartinO »

Facebook Share    


Offline redrocket

  • Full Member
  • ***
  • Location: High Point NC Finally here
  • Posts: 467
    • http://www.idmotorsports.net
My Nissan S12
« Reply #1 on: 08:42:02 AM / 14-Oct-08 »
First off welcome.....

looks like you have a good plan there for the car good luck and keep us all informed on the progress

Robbie
Robbie
Women are like Voltron the more you hook up the better it Gets.


Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
My Nissan S12
« Reply #2 on: 01:40:57 PM / 14-Oct-08 »
yes, welcome... where are you from? I think Sweden, since you put "180ZX".

-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« Reply #3 on: 01:45:37 PM / 14-Oct-08 »
Quote from: redrocket
First off welcome.....

looks like you have a good plan there for the car good luck and keep us all informed on the progress

Robbie
Thx.
Yes I will.

Quote from: Arro
yes, welcome... where are you from? I think Sweden, since you put "180ZX".
Yes I'm from sweden ^^
« Last Edit: 01:46:45 PM / 14-Oct-08 by MartinO »

Offline 200sxkitcar

  • Moderators
  • S12 Guru
  • *****
  • Location: Hemet CA, where its warm
  • Posts: 5,668
    • http://s232.photobucket.com/albums/ee276/Sterlingps12/
My Nissan S12
« Reply #4 on: 12:50:43 AM / 15-Oct-08 »
Welcome!

for your body, you may want to look for Chester, he is from Poland, active on the UK forums, he makes a cool widebody replica kit for the S12's.

Looks good man!
Sterling Picton
 

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« Reply #5 on: 04:25:10 AM / 19-Oct-08 »
Quote from: 200sxkitcar
Welcome!

for your body, you may want to look for Chester, he is from Poland, active on the UK forums, he makes a cool widebody replica kit for the S12's.

Looks good man!
Yeah, i've seen thoose they look realy cool.
But i think i will buy this:
http://www.raceonusa.com/index.asp?PageAct...amp;ProdID=6426
And modifie it to fit my s12.
And then That widewbodykit you was talking about.

I modified the taillight too.

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
My Nissan S12
« Reply #6 on: 03:38:55 PM / 19-Oct-08 »
what motor are you running? I didn't see that in your forst thread and also welcome

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« Reply #7 on: 12:26:16 AM / 20-Oct-08 »
Quote from: sideways_s12
what motor are you running? I didn't see that in your forst thread and also welcome
I'm running a ca18et. All s12 in sweden have those... well, except for those who have changed it.
« Last Edit: 09:29:28 AM / 07-Nov-08 by MartinO »

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« Reply #8 on: 09:32:37 AM / 07-Nov-08 »
Gor rid of some rust today


Then the "welder"(is that the right word?) didn't like me:


So i cleaned it and it got mutch better

Offline redrocket

  • Full Member
  • ***
  • Location: High Point NC Finally here
  • Posts: 467
    • http://www.idmotorsports.net
My Nissan S12
« Reply #9 on: 09:44:12 AM / 07-Nov-08 »
body work is coming along nicely my friend
Robbie
Women are like Voltron the more you hook up the better it Gets.


Offline David B

  • S12 Guru
  • *****
  • Location: NOVA (Northern VA), Manassas
  • Posts: 7,366
My Nissan S12
« Reply #10 on: 12:51:25 PM / 07-Nov-08 »
what type of paint is that under the fenders


caged ca20e/ka24e/sr20det/ka24de/1jzgte SRA hatch. super sick

Quote from: Arro
Goddamn David you seriously are hard core man.
Quote from: tjs91tsi
Ohh, and unless you havn't figured it out yet, Stop driving with coolant leaks and Stop dropping nails in your fucking trannys!!!

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« Reply #11 on: 08:06:00 AM / 08-Nov-08 »
Quote from: redrocket
body work is coming along nicely my friend
Thank u.

Quote from: David B
what type of paint is that under the fenders
I don't realy know the english word for it but it's like bodypaint.

Offline EightySix200SX

  • low.fun.sexytime!
  • S12 Guru
  • *****
  • Location: SoCal, CA.US/BajaNorte, TJ.MEX
  • Posts: 5,218
  • Vehicle: 1986 Nissan 200SX
  • NEED ANYTHING S12 RELATED PM or Email today!
    • «LOW.XII.POSITION» INTL PARTS SALES/DISTRIBUTION
My Nissan S12
« Reply #12 on: 01:19:54 PM / 08-Nov-08 »
looking good im swapping a ca18et into my coupe....
«LOW.XII.POSITION».nostalgic car culture & club ¦est.2004
¡lowfunsexytime! Global New & Used Parts Sales/Distribution

CLUB-S12 FEEDBACK RATING +72! CLICK HERE
ANYTHING  LOOKIKG FOR :  PARTS IN STOCK CLICK HERE
NEED S12 PARTS NOT LISTED IN MY THREAD? EMAIL lowXIIposition@yahoo.com OR Facebook US: www.facebook.com/need12parts/
I <3 DEMI LOVATO= ID SMASH! SELENA GOMEZ/MILEY CYRUS= R TRASH!

Damn let a Nig have a moment of glory b4 you start fucking with him.

Offline nismologist

  • S12 Guru
  • *****
  • Location: Sacramento,California
  • Posts: 3,541
    • http://
My Nissan S12
« Reply #13 on: 04:41:35 PM / 08-Nov-08 »
200 love.or i guess 180 love too.so its literally a 180zx??that sounds cool.

YOU THOUGHT SO, BUT I KNOW SO.
-Macho Man Randy Savage

Offline MartinO

  • n00b
  • **
  • Location: Sweden
  • Posts: 13
My Nissan S12
« Reply #14 on: 01:04:45 PM / 11-Nov-08 »
Quote from: EightySix200SX
looking good im swapping a ca18et into my coupe....
Yeah, the ca18et isn't the coolest if you ask me but my cousin have a Sr20de whish i will get for free =o)

Quote from: nismologist
200 love.or i guess 180 love too.so its literally a 180zx??that sounds cool.
Yepp it's a 180zx. I'm not sure why they picked that name, but it works  

Oh, and a homie of mine dropped of a pare off fiberglas front fenders. Brand new for a very good price.
Pics will come soon.