I Found A Vh45 For 200 Bucks

[David B]

so at the J yard i found a clean q45, a newer one. super clean exept the interior leather is nasty worn, but under the hood it looks like a detail shop basically cleaned it



all engines there are 200 bucks
is it possible, with my friend that can fab mildly, welding, etc. to actually pull this off?

where could i get a manual tranny for this? and what price range am i looking at

[200sxkitcar]

you would need the wiring harness and ecu of course as well...

a tight fit, it might be a bitch to work on.  definitely some fabbing required

i'll let others who are familiar with this swap into s13s comment on the rest

[Xano]

david, for total cost necessary to get it in and running, you'd be looking at about 2 grand or more. and that is taking into account your cheap price on the engine.

[seishuku]

For a manual trans, you'll need the Mazworx adapter kit and a Z32 trans. Otherwise, check out any of the S13/S14 swaps, and keep in mind that the S12 bay is quite a bit shorter.

Edit:
OH! And make sure the VH is the model with metal chain guides and not the plastic ones, it'll be a later model with the good ones. I don't recall the exact years, and you can upgrade them yourself, but newer is always better.

[Sean1978]

Guy on carolinanissans.com pulled it off for less than 1K, must have fab skills:
Link here

If you wanted something cheap that would haul ass in a straight line I'd just drop it in with the automatic. All you would need is a custom driveshaft.

[sinestro]

did'nt that guy in australia do this swap, with like twin turbos too, i think his name was silverbox or something

[David B]

thats for the mazowrx link i have seen that before, the adapter plate is 300 bucks which sint too bad. i can get a z32 trrans too

o far weve got the small stuffs

we only had an hour before it closed. i had work so far

no fluids in the car at all they took it out

intake is out

fuel filter is out

radiator is basically out

exaust has no cat so i dont need t0o disconnect the downpipe (junkyard)


here it is before they kicked us out

[Magnum]

What year is it? Pre 94 engines have chain guide issues, and the Mazworx adapter will not work on the newer VH41DE engine in the newer Q45's.

[sideways_s12]

someone on here has done the swap before then pulled the motor and sold the car so yes it can be done and yes you'll have tpo do quite a bit of fabbing but I think it would be worth it to do I was thinking of doing this swap but I would do it in a notch...

[David B]

wne tagain in the pouring rain. pitched a tent over the q45... it was too muddy i got some done but not alot.

ughh im gonnna go back tomorrow

[IggyEGuana]

Keep at it man it'll be worth it.  Fuck the nay sayers!

What year is the Q man? and check the sticker for displacement

[ross]

awesome deal man, i look forward to seeing more progress. keep up the good work.