Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: [ab]-[can] Zastaba's Parts Sale  (Read 16323 times)

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
[ab]-[can] Zastaba's Parts Sale
« on: 03:50:42 PM / 13-May-09 »

I have sold me s12 and no longer have any parts.

Mods please lock this thread!





Hello all,

I finally had time to get to revamping my sale thread. For all information - please read below and check out all the pictars.

Money:
 - I like and prefer Paypal.
 - All sale prices are in Canadian Dollars. It is close enough to American right now I'll consider it the same. (This is subject to change in the future)
 - The money must be finalized in to my pocket before any shipping takes place. If you do not like this - then please purchase elsewhere.
 - For any other arrangements - please pm or email me.

Shipping:
 - I live in Alberta, Canada.
 - I will ship anywhere - but the shipping cost is yours.
 - I like and prefer UPS.
 - I will ship within one week of payment going through.
 - For any other arrangements - please pm or email me.
 *** I will ship Postal Service - but due to past problems I will not be doing damage refunds if you want to go this route. Risk is yours to take.

All that info being said - thanks for checking my sale page out!


































« Last Edit: 06:16:36 PM / 10-Sep-13 by zastaba »

Facebook Share    


-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline David B

  • S12 Guru
  • *****
  • Location: NOVA (Northern VA), Manassas
  • Posts: 7,366
[ab]-[can] Zastaba's Parts Sale
« Reply #1 on: 04:15:33 PM / 13-May-09 »
no drives mirror


caged ca20e/ka24e/sr20det/ka24de/1jzgte SRA hatch. super sick

Quote from: Arro
Goddamn David you seriously are hard core man.
Quote from: tjs91tsi
Ohh, and unless you havn't figured it out yet, Stop driving with coolant leaks and Stop dropping nails in your fucking trannys!!!

Offline Praizewood

[ab]-[can] Zastaba's Parts Sale
« Reply #2 on: 04:26:10 PM / 13-May-09 »
Not going to buy anything, but nicest sale setup ever seen  Good luck with it!
I see you baby,
working that car,
working that car
working that car.
-Groove Armada remix

USEF says "Impulsion is the term used to describe the transmission of an eager and energetic, yet controlled propulsive energy generated from the hindquarters into the athletic movement of the horse.". How cool is that? Impulsion build here


Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
[ab]-[can] Zastaba's Parts Sale
« Reply #3 on: 05:06:44 PM / 13-May-09 »
...
« Last Edit: 09:30:42 PM / 21-May-10 by zastaba »

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline stapes

  • n00b
  • **
  • Location: Sydney Australia
  • Posts: 8
    • http://
[ab]-[can] Zastaba's Parts Sale
« Reply #4 on: 08:35:20 PM / 30-May-09 »
PM sent re sale of front indicators/parking lamps.

Stapes

Offline Xano

  • Viva la Tropico!
  • Administrator
  • S12 Guru
  • *****
  • Location: Cedar Rapids, IA
  • Posts: 6,328
  • Vehicle: 2014 Dodge Charger
    • This Isn't Over, LLC
[ab]-[can] Zastaba's Parts Sale
« Reply #5 on: 11:12:50 PM / 30-May-09 »
Let me know about the rear wiper motor (also sent you a PM.
~xano


Offline Maxpow

  • S12 Guru
  • *****
  • Location: Carlsbad, Ca (North San Diego County)
  • Posts: 4,192
  • Vehicle: 1987 Nissan S12
[ab]-[can] Zastaba's Parts Sale
« Reply #6 on: 03:16:28 PM / 31-May-09 »
Quote from: Praizewood
Not going to buy anything, but nicest sale setup ever seen  Good luck with it!


Yeah this is beautiful. Wish you still had the tails  /cry
1987 Nissan 200sx SE ("The Squirrely Drifter") - Totaled and Gone forever
1987 Nissan 200sx SE ("The Weebly Wobbler") - Impounded and Gone forever
2007 Kia Spectra - Fantastic Daily Driver - Custom CAI, NGK wires/plugs.
2002 Hyundai Accent - Totaled and Gone Forever.

MAXPOW'S PARTS SALES: http://club-s12.org/v3/index.php?topic=31350.new#new
SEND ME A PMhttp://club-s12.org/v3/index.php?action=pm;sa=send;u=2092 /EMAIL Maxpow99@hotmail.com

Certified Member of SoCal Parts Alliance.

And, I'm going to say this publicly. Maxpow knows how to keep me at bay, while still laughing with him. Take lessons y'all

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
[ab]-[can] Zastaba's Parts Sale
« Reply #7 on: 07:31:39 PM / 31-May-09 »
PM sent for the blue vents
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline drodrig2

  • n00b
  • **
  • Location: San Jose, Costa Rica, Central America
  • Posts: 3
    • http://club-s12.org
[ab]-[can] Zastaba's Parts Sale
« Reply #8 on: 02:36:40 PM / 01-Jun-09 »
Hi , I need to want buy the A/C air vents, and headligths swicht , let me know how to buy this things, please, send address where pay, and all info we need, thanks ~!!!

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
[ab]-[can] Zastaba's Parts Sale
« Reply #9 on: 03:43:08 PM / 01-Jun-09 »
You'll forgive me when I say I already hit him up about the vents... I mean seriously man my post where I said as much is like right above yours.

Also you need to add your location in your profile.
« Last Edit: 03:47:14 PM / 01-Jun-09 by Arro »
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline Xano

  • Viva la Tropico!
  • Administrator
  • S12 Guru
  • *****
  • Location: Cedar Rapids, IA
  • Posts: 6,328
  • Vehicle: 2014 Dodge Charger
    • This Isn't Over, LLC
[ab]-[can] Zastaba's Parts Sale
« Reply #10 on: 06:52:47 PM / 01-Jun-09 »
where'd this guy go.  I asked about a rear wiper motor days ago in PM and in the thread, and have had no response.  probably just busy, but just letting those interested in parts know.
~xano


Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
[ab]-[can] Zastaba's Parts Sale
« Reply #11 on: 07:26:59 PM / 01-Jun-09 »
Yeah I'm sure he'll get back to us.
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline David B

  • S12 Guru
  • *****
  • Location: NOVA (Northern VA), Manassas
  • Posts: 7,366
[ab]-[can] Zastaba's Parts Sale
« Reply #12 on: 10:57:06 PM / 27-Aug-09 »
too much time on your hands, love the blurred out sold parts


dohc ka headers right? not sohc?

greeaaaat price for the alt and fuel pump/housing!



and DOHC ka24e plug wires work on SOHC ka.. btw
« Last Edit: 10:58:14 PM / 27-Aug-09 by David B »


caged ca20e/ka24e/sr20det/ka24de/1jzgte SRA hatch. super sick

Quote from: Arro
Goddamn David you seriously are hard core man.
Quote from: tjs91tsi
Ohh, and unless you havn't figured it out yet, Stop driving with coolant leaks and Stop dropping nails in your fucking trannys!!!

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
[ab]-[can] Zastaba's Parts Sale
« Reply #13 on: 11:00:17 PM / 27-Aug-09 »
...
« Last Edit: 09:30:24 PM / 21-May-10 by zastaba »

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline Leegamer

  • No.S12.Position
  • Sr. Member
  • ****
  • Location: Ashland, Va (Near Richmond)
  • Posts: 2,337
    • http://www.vaz31club.com
[ab]-[can] Zastaba's Parts Sale
« Reply #14 on: 11:25:39 AM / 28-Aug-09 »
I could use that turbo header in the future.  I shall contemplate.

Offline RB25sx - SLPR

  • Full Member
  • ***
  • Location: Victoria BC, Canada
  • Posts: 857
[ab]-[can] Zastaba's Parts Sale
« Reply #15 on: 11:53:22 PM / 14-Sep-09 »
Money sent!

Offline JonB

  • CONTRIBUTING MEMBER
  • S12 Guru
  • *****
  • Location: SW Pennsylvania
  • Posts: 2,622
    • http://
[ab]-[can] Zastaba's Parts Sale
« Reply #16 on: 08:05:30 PM / 16-Sep-09 »
That keyless thing; You don't know that it works thing. Got the key code?

Offline David B

  • S12 Guru
  • *****
  • Location: NOVA (Northern VA), Manassas
  • Posts: 7,366
[ab]-[can] Zastaba's Parts Sale
« Reply #17 on: 09:47:53 PM / 16-Sep-09 »
pmed


caged ca20e/ka24e/sr20det/ka24de/1jzgte SRA hatch. super sick

Quote from: Arro
Goddamn David you seriously are hard core man.
Quote from: tjs91tsi
Ohh, and unless you havn't figured it out yet, Stop driving with coolant leaks and Stop dropping nails in your fucking trannys!!!

Offline taktics702

  • Full Member
  • ***
  • Location: Las Vegas, NV USA
  • Posts: 196
[ab]-[can] Zastaba's Parts Sale
« Reply #18 on: 09:59:06 PM / 16-Sep-09 »
would you by any chance have a front right passenger side fender?

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
[ab]-[can] Zastaba's Parts Sale
« Reply #19 on: 01:47:46 AM / 17-Sep-09 »
...
« Last Edit: 09:30:13 PM / 21-May-10 by zastaba »

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------