Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: Vegas S12 Notch Build!MOTOR IS IN THE MOTOR IS IN!  (Read 77585 times)

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build!MOTOR IS IN THE MOTOR IS IN!
« on: 11:51:15 AM / 21-Aug-09 »
hey i have owned my 85 notch with a ca20e for a while now and well after a long time thinking if i should sell it or not i finally decided to keep it and do CA18DET swap into it
if all goes well in a couple of months i'll have her running again
my interior is pretty clean (and everything works even the A/C)and dont plan on touching it much want to keep it as stock as possible besides the motor  and suspension:evilbrows: as for my exterior its in desent condition got painted by the previous owner who is my uncle he was the one who put the se side and rear mud but ended up putting a mustang wind on it which i will remove. things i want and will do to the exterior is the clear turn signal turbo hood hopefully if i ever find one  lol and some fogs which i think looks awsome on the car. and of course the suspension and get rid of the wheels on it now still looking around on what wheels i wanna put on it and what ofset i just cant make up my mind haha.
well this is how she sits as of now..
http://viewmorepics.myspace.com/index.cfm?...albumId=2998113 pictures from my myspace
photobucket make the pics way to small from my phone
« Last Edit: 03:50:50 PM / 22-Nov-12 by vegasS12 »

Facebook Share    


Offline Leegamer

  • No.S12.Position
  • Sr. Member
  • ****
  • Location: Ashland, Va (Near Richmond)
  • Posts: 2,337
    • http://www.vaz31club.com
Vegas S12 Notch Build
« Reply #1 on: 12:03:21 PM / 21-Aug-09 »
Dude.  That's a gorgeous notch.

What year mustang is that spoiler from?  I think if it were a bit lower onto the car, it'd be sick. If you take it off, send it my way.
« Last Edit: 12:03:43 PM / 21-Aug-09 by Leegamer »

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #2 on: 12:06:05 PM / 21-Aug-09 »
im not to shure what year i would have to ask my uncle but when i take it off i'll be shure to let you.

Offline Leegamer

  • No.S12.Position
  • Sr. Member
  • ****
  • Location: Ashland, Va (Near Richmond)
  • Posts: 2,337
    • http://www.vaz31club.com
Vegas S12 Notch Build
« Reply #3 on: 12:13:30 PM / 21-Aug-09 »
Quote from: vegasS12
im not to shure what year i would have to ask my uncle but when i take it off i'll be shure to let you.


Cool.  Thanks...it's similar to the J-Spect RSX Spoiler, which I want badly for my notch.

Do you have the CA18DET already or are you searching?
« Last Edit: 12:14:16 PM / 21-Aug-09 by Leegamer »

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #4 on: 12:29:31 PM / 21-Aug-09 »
No I don't have it yet I been searching for local one for a while but no luck don't really want to pay for shipping but if it comes down to I guess I would need to.

Offline Leegamer

  • No.S12.Position
  • Sr. Member
  • ****
  • Location: Ashland, Va (Near Richmond)
  • Posts: 2,337
    • http://www.vaz31club.com
Vegas S12 Notch Build
« Reply #5 on: 12:34:40 PM / 21-Aug-09 »
Quote from: vegasS12
No I don't have it yet I been searching for local one for a while but no luck don't really want to pay for shipping but if it comes down to I guess I would need to.


I bet you could find something in SoCal if you din't mind driving.

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #6 on: 12:41:40 PM / 21-Aug-09 »
Quote from: Leegamer
I bet you could find something in SoCal if you din't mind driving.
Yea haven't really looked out of Vegas yet. I'm just waiting untill I have enough to buy everything at once.

Offline D-sport S12

  • Sr. Member
  • ****
  • Location: Kelowna, BC, Canada
  • Posts: 1,072
  • Vehicle: 1986 Nissan S12
Vegas S12 Notch Build
« Reply #7 on: 02:22:19 PM / 21-Aug-09 »
SRA?
Jesse R

Keichi Tsuchiya: "I'm afraid if I raced you on the street I'd push you to your death."


Offline David B

  • S12 Guru
  • *****
  • Location: NOVA (Northern VA), Manassas
  • Posts: 7,366
Vegas S12 Notch Build
« Reply #8 on: 02:59:15 PM / 21-Aug-09 »
drift drifttt


caged ca20e/ka24e/sr20det/ka24de/1jzgte SRA hatch. super sick

Quote from: Arro
Goddamn David you seriously are hard core man.
Quote from: tjs91tsi
Ohh, and unless you havn't figured it out yet, Stop driving with coolant leaks and Stop dropping nails in your fucking trannys!!!

Offline Leegamer

  • No.S12.Position
  • Sr. Member
  • ****
  • Location: Ashland, Va (Near Richmond)
  • Posts: 2,337
    • http://www.vaz31club.com
Vegas S12 Notch Build
« Reply #9 on: 02:59:38 PM / 21-Aug-09 »
Quote from: D-sport S12
SRA?


It's an 85, so should be IRS.

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #10 on: 03:40:30 PM / 21-Aug-09 »
Quote from: Leegamer
It's an 85, so should be IRS.
it's IRS
« Last Edit: 09:58:13 PM / 16-Dec-09 by vegasS12 »

Offline Leegamer

  • No.S12.Position
  • Sr. Member
  • ****
  • Location: Ashland, Va (Near Richmond)
  • Posts: 2,337
    • http://www.vaz31club.com
Vegas S12 Notch Build
« Reply #11 on: 03:43:03 PM / 21-Aug-09 »
Quote from: vegasS12
actually its a SRA  


 

Really?  You sure it's an 85?  Maybe early production date 85s had SRA?

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #12 on: 03:45:31 PM / 21-Aug-09 »
Quote from: Leegamer


Really?  You sure it's an 85?  Maybe early production date 85s had SRA?
yea im pretty shure i'll triple check it.just in case of doubts haha.
but it is a SRA!!!

Offline sideways_s12

  • CS12 OG
  • Global Moderator
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,146
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
Vegas S12 Notch Build
« Reply #13 on: 03:59:00 PM / 21-Aug-09 »
finally got to post on here sweet can't wait to see the project in action if you need help let me know iggy is real knowledgable (sp) as well and we don't mind helping a fellow s12er btw this is Jason 85turbo_silvia from las vegas racing scene

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #14 on: 04:03:37 PM / 21-Aug-09 »
Quote from: sideways_s12
finally got to post on here sweet can't wait to see the project in action if you need help let me know iggy is real knowledgable (sp) as well and we don't mind helping a fellow s12er btw this is Jason 85turbo_silvia from las vegas racing scene

hey yea i guess the system thought i was  lol thanks alot bro i'll be contacting you guys soon when i end up buying the 18det well hopefully soon haha.

Offline 200sxkitcar

  • Moderators
  • S12 Guru
  • *****
  • Location: Hemet CA, where its warm
  • Posts: 5,668
    • http://s232.photobucket.com/albums/ee276/Sterlingps12/
Vegas S12 Notch Build
« Reply #15 on: 01:05:17 AM / 22-Aug-09 »
Very nice car, good to see that its still around!
Sterling Picton
 

Offline Maxpow

  • S12 Guru
  • *****
  • Location: Carlsbad, Ca (North San Diego County)
  • Posts: 4,192
  • Vehicle: 1987 Nissan S12
Vegas S12 Notch Build
« Reply #16 on: 02:45:03 AM / 22-Aug-09 »
Nice notch. Has some nice touches that make it pretty sweet. Kinda makes me want one now.
1987 Nissan 200sx SE ("The Squirrely Drifter") - Totaled and Gone forever
1987 Nissan 200sx SE ("The Weebly Wobbler") - Impounded and Gone forever
2007 Kia Spectra - Fantastic Daily Driver - Custom CAI, NGK wires/plugs.
2002 Hyundai Accent - Totaled and Gone Forever.

MAXPOW'S PARTS SALES: http://club-s12.org/v3/index.php?topic=31350.new#new
SEND ME A PMhttp://club-s12.org/v3/index.php?action=pm;sa=send;u=2092 /EMAIL Maxpow99@hotmail.com

Certified Member of SoCal Parts Alliance.

And, I'm going to say this publicly. Maxpow knows how to keep me at bay, while still laughing with him. Take lessons y'all

Offline Drft-s12

  • Full Member
  • ***
  • Location: Lancaster, Cali
  • Posts: 780
Vegas S12 Notch Build
« Reply #17 on: 02:38:48 PM / 22-Aug-09 »
Man your car is clean as fuck whoever had before you took care of it.....please find out what year mustang wing is that cause i want one for my notch...glw your project cant wait to see more

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #18 on: 04:38:40 PM / 22-Aug-09 »
thanks guys once i find out what year wing it is i'll let you know. the one thing i really dont like about it is that it doesnt sit flush with the trunk it can be easily fixed i'll take pictures of it when i get home

Offline vegasS12

  • Sr. Member
  • ****
  • Location: las vegas NV
  • Posts: 1,128
    • http://
Vegas S12 Notch Build
« Reply #19 on: 02:57:10 AM / 23-Aug-09 »
I'm looking for some clear corners for the notch if any one has any let me know going to autozone today to see if they have any yellow fogs in stock.