1985 Kade S12 Notch From Pos To Mow (original post has been reconfigured.)

Started by sam31183, 07:42:27 PM / 02-Oct-09

Previous topic - Next topic

sam31183

I normally work on the car on saturdays, but i took this week off. I am changing the oil next saturday...not sure what else I am going to do next week...at any rate, here are some 130am getting gas pics from last night.





yes, i know a bird crapped on my hood....damn birds.




Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


sam31183

It has been a minute since I last updated my build thread. I have been busy with work and school....now i am busy with just the car due to school being over until the 5th and me being laid off for a month or two. Anyways, lets take a look at what I have done recently....

I replaced the rear side window trim...I bought the trim off of fyneyoungstunna a long with some tail lights he had.

before with no trim.

after


I used some silicone to attach them to the car because the mounting hardware...ie clips where pretty much all gone. I ended up getting some silicone on the car itself...but since it is getting painted soon i dont give a crap.
I also bought a steering wheel and hub...they work out pretty well and i like them...also, for those of you who dont know i made a custom shift boot/sheet metal cover...


The horn button that came on the wheel said type rs on it...there for it was gay and did not go on the car.
I also replaced my cracked tail lights with the set I bought from my coloradian friend fyneyoungstunna...funny thing was one of my tail light bulbs was out on the set that came with the car...so i got a good set of tail lights just in time...


Next order of business is an aftermarket seat install.

BTW The club stickers are one offs I made at work...they are not for sale or anything...but if arro has some interest in using them as club stickers i could produce them for the club...they are 3 piece decals though, so they are kind of difficult to put together.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


EightySix200SX

notch ftw!!! belive me those rear window trims are bitches i had trouble with mine i re epoxyed the clips on i had to stack pennies to get it flush lmao
ÃÆ'ââ,¬Å¡Ãƒâ€šÃ,«LOW.XII.POSITIONÃÆ'ââ,¬Å¡Ãƒâ€šÃ,».nostalgic car culture & club ÃÆ'ââ,¬Å¡Ãƒâ€šÃ,¦est.2004
ÃÆ'ââ,¬Å¡Ãƒâ€šÃ,¡lowfunsexytime! Global New & Used Parts Sales/Distribution

CLUB-S12 FEEDBACK RATING +72! CLICK HERE
ANYTHING  LOOKIKG FOR :  PARTS IN STOCK CLICK HERE
NEED S12 PARTS NOT LISTED IN MY THREAD? EMAIL lowXIIposition@yahoo.com OR Facebook US: www.facebook.com/need12parts/
I <3 DEMI LOVATO= ID SMASH! SELENA GOMEZ/MILEY CYRUS= R TRASH!

Quote from: fyneyoungstunna on 07:29:16 PM / 09-Jul-11
Damn let a Nig have a moment of glory b4 you start fucking with him.

sam31183

I believe it. I have had more then one person tell me that they are a pain in the ass to get off, and they are definitely a pain in the ass to get back on. The silicone on the passenger side took forever to dry...I almost put a couple of zip screws into it.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


Arro

I actually have the sticker shit set up, I just need the guy to get back to me with the sample now. Yes, I actually have been doing something about it

-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.orgHella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
Quote from: s-chassis_only on 07:43:21 PM / 25-Sep-10 i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

sam31183

I figured you were on it...I just knew you were busy and I had access and the know how to make my own decals. It was kind of nice my boss had more chrome vinyl then he knew what to do with.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


Arro

-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.orgHella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
Quote from: s-chassis_only on 07:43:21 PM / 25-Sep-10 i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

sam31183

forgot to mention my windshield wipers came apart again last night on my way home. I am guessing that a hair tie isnt a permanent fix. .

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


fyneyoungstunna

i got some more lil bits for you sam, no charge you just pay shipping if you want them.

man i cant wait to get another notch.

and i know im an ass for saying it but you mom is hot in those pics.

anyways. if the guy still has it i know where a turbo mani is for hella cheap, its a gladman. pm me and ill tell you the price.
If I agreed with you we'd both be wrong.

sam31183

i am going to pass on the turbo mani...i am keeping her na for reliability sakes. What pieces do you have for me though for only the cost of shipping? lol.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


fyneyoungstunna

sorry it took so long to reply.

well i have the door panels on the inside if you want em, they are not in the best of condition, but they will work for a temp. i have the entire stock radio and its in mint condition, speakers are also mint. i have the reflectors from around the car, all are not even scratched. and just a crapton of other stuff. i still have basically a complete shell in my garage minus most of the dash stuff and the seats and carpet. i have the trunk carpet though, its in basicaly awesome condition. just tons of stuff. ive decided to build the ka for now and put it into my z32 so its time to get funds.
If I agreed with you we'd both be wrong.

sam31183

I do need the back reflector thing for the drivers side back fender...wait...i was going to jb weld that back together...errr, ok, maybe i should still get the reflectors for spares....any pics of the door panels? I should be interested in the trunk carpet...but my trunk kind of leaks...i am most likely just going to por15 and or rhino line it eventually. Let me know though if there is anything else on the shell that you think is of value. And I will let you know if I can think of anything I really need...

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


EternalSwap

sam!
is that the egay s13 deep dish wheel?
hows the placement? it looks a little closer than stock, which i like..
-Alex

EL PENE DE LA MUERTE
Quote from: David B
wow. im horny. i dont know why. but i just figured id let you guys know. i really wanna bite someones bean. i mean. chomp on some ass
Quote from: Arro on 12:26:40 AM / 10-Nov-10
hahah Alex just pwned C-S12, w3rd.

sam31183

it is closer than stock. I have to reach further back to hit my turn signal stalk...threw me off at first because i always thought my high beams were on for a couple of days...and than i got used to it. The horn button it came with was very very gheytastical. Also, there is a line on the hub that is supposed to signify top, right...well if you line the hub up with that line going to the top the holes on the wheel dont match up worth a crap. I took the hub back off and put the steering wheel on the hub on my comp desk and then put the hub back on the car. The hub/wheel came with a long set of screws and a short set of screws, the long set of screws is supposed to be for having no horn button while the long ones are supposed to be for having the horn button. Without the horn button on the short screws thread in fine up top, but the bottom ones didnt thread worth a damn, I took 3 nuts that came with the kit and threaded those down all the way on three long screws and put those on the bottom...works fine. 35 bucks and I cant complain to much. I ordered a wheel with a red line and red thread, but they called and told me they were out so i just got the yellow and it has been growing on me. At first the car felt like a go kart with this small of a wheel, but i have gotten used to it and love it.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


EternalSwap

ah okay sweet. imma buy one of these for mine

ps your car is hawt, can i drive?
-Alex

EL PENE DE LA MUERTE
Quote from: David B
wow. im horny. i dont know why. but i just figured id let you guys know. i really wanna bite someones bean. i mean. chomp on some ass
Quote from: Arro on 12:26:40 AM / 10-Nov-10
hahah Alex just pwned C-S12, w3rd.

Arro

-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.orgHella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
Quote from: s-chassis_only on 07:43:21 PM / 25-Sep-10 i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

EternalSwap

-Alex

EL PENE DE LA MUERTE
Quote from: David B
wow. im horny. i dont know why. but i just figured id let you guys know. i really wanna bite someones bean. i mean. chomp on some ass
Quote from: Arro on 12:26:40 AM / 10-Nov-10
hahah Alex just pwned C-S12, w3rd.

sam31183

no alex, you cant drive...but i would make you crap your pants if you went for a ride with me...i have seriously scared myself in this car running the lighthouse loop...3rd gear almost the whole way in and out of the gas sliding everywhere...thing is nuts...and needs suspension, but i had no idea i could drive a car like that lol.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


EternalSwap

i scared arro in his own neon
i scared a chick driving thru a canyon in my truck
i scared andrew getting on the freeway
hahah
lemme drive it skank
-Alex

EL PENE DE LA MUERTE
Quote from: David B
wow. im horny. i dont know why. but i just figured id let you guys know. i really wanna bite someones bean. i mean. chomp on some ass
Quote from: Arro on 12:26:40 AM / 10-Nov-10
hahah Alex just pwned C-S12, w3rd.

sam31183

bahahaha, I have scared anyone who has rode in anything with me. I scared my brother one night in his fiancee's newer chevrolet malibu. I scared anyone who got in my 626 with me...i scared anyone who got in my z with me. I have autoxed for several years and did 2 drivers classes...i can drive yo.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogenhaha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)
Quote from: Shark808 on 02:17:44 PM / 13-Dec-11
Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...