Ok Iggy, Mrs. Sideways and myself pulled apart the motor last and found very minimal damage to the motor first the head gasket was blown and second the #4 piston had a very slight hole around the edge near th cyl wall so from an assement last night I need a head gasket and a piston luckily I bought rods and pistons from the det for my single cam project so I have a spare set lol while I'm in there I'm gonna rering all 4 and check the bearings and make sure they are within spec then hopefully I can this bad boy up and running by the end of the month.. Wish me luck I will keep you updated as usual....