what did you do to your s12 today?!

[Wonderingraven]

Swapped the TPS sensor. Left is my Orriginal TPS Sensor, the right is the sensor from an KA24DE.

[imtheguy247]

^ I switched mine a few weeks ago. The new sensor had no wires coming out of it like my old one did. But it seems to work so im not going to complain

[Wonderingraven]

when I picked up the KA24DE from "jay" lol it had that sensor on it, I believe them sensors are ment for 5spd manual tranny's
the one on the left is from the vg30e OEM, in which I believe for an autotragic, I also replaced that oem with one from rock auto, which is what I have on there now. It shifts soo much better especially I got my passing gear back for the slow old guys on the highway that wont drive faster then minus 10 - 20 mph from the posted speed at 65. or the constant bottle neck at the i-15 / us 95 here in vegas at rush hour. To a point where I Squat when I hit the throttle at 45 now instead of being bogged down touching the gas.

[Sean_howell1]

Installed a/f gauge, car wash, burnout, pissed neighbor off .

[silverton]

If my tax return is big enough I might buy a patty for a daily....i have wanted one for awhile.

they are pathy's

Spent my S12 fund on a Pathfinder . . . damn Colorado winters!  Time to start saving again.

npora.ipbhost.com if you haven't joined already! my username is the same there as it is here.

[Jay]

when I picked up the KA24DE from "jay" lol it had that sensor on it, I believe them sensors are ment for 5spd manual tranny's

I see no picture, but yes. The TB I sent you was from a 5speed car.
Interesting tidbit to know though. That it won't work on an auto VG.

[night_s12]

timed it today and its still a little rough but got new NGK v-power plugs and gonna get new NGK wires thatll all go in thursday. got some vids up on my thread.

[drummingpariah]

Freed up a frozen ebrake cable ... the opposing cable is completely broken, but holds it in place at least so one side locks up when I yank the handle hard enough. Good enough to pass safety inspection!

[SchizophrenicMC]

Whoo, Pariah.

I started getting this harness put back together, from the ECU, up. Then found that I'd need a precision screwdriver if I wanted to keep getting these pins out. So I'm like -__-

At least I have a plan now.

[drummingpariah]

I just fixed the reverse lights now. All I need now are tires and it's street legal!

Schizo, you really just need a lathe. Then NOTHING can stop you!

[SchizophrenicMC]

This is true. The man with a lathe is invincible.

[iceageg]

< has a lathe. Just need the another s12 now.

[Wonderingraven]

Ordered a new o2 sensor.  drove it to work, then to lunch, then home.

[SchizophrenicMC]

Soldered a bunch of wiring, got the TPS connector installed. Gettin' shit done son

[Colonel Gustard]

drove it around, installed another distributor, and got my pedobear sticker jacked

[night_s12]

Fixed plug wire order and drove it around the block. My friends have dubbed it the mobile fog machine

[Prolowtone]

^lol sounds like my car before i fixed the valve stem seals. I would drive at night and watch the street light disappear in my cloud of smoke.
I thought about my s12 and the parts i want to put in her

[Colonel Gustard]

I thought about my s12 and the parts i want to put in her

NEW SIG!!!

[SchizophrenicMC]

Schizo approves

[mentalxpreshun]

found 3 holes blasted thru the rotor of my distributor... swapped in a newer used one and Delilah is runnin better than ever minus oil leak =) too bad my brother needs to borrow her til the end of the year, or knowing him, indefinitely... back to driving the gasguzzling whore of a Mustang =(