Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: zastaba's erebuni s12  (Read 16529 times)

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
zastaba's erebuni s12
« on: 06:09:13 AM / 20-Mar-11 »

Spring 2010 I bought this erebuni s12 off of SR12det (guy names Lukasz) who lived in Ontario, Canada and I shipped to Alberta. He owned it for 9 years total and had done a lot of work to it before deciding to sell. The sale was based on a promise to Lukasz to continue workin on and upgrading this s12 - and to keep building it potential as one of the coolest and rarest s12's out there.

Infurmationz:

 - Erebuni body kit
 - SR20DET redtop on stock boost
 - Cold air intake and intercooler
 - Turbosmart bov
 - Aftermarket gauges rpm, boost, water temp, oil
 - ACT STG 2 Disk Clutch
 - 3" exhaust, no cat
 - Wheels 16x7 front, 16x8 rear
 - Custom balanced drive shaft, engine mount and solid tranny mount
 - Canuck MS lowering springs
 - Probably more, add later

Sum Pictarz:

Before winter when I was working on it.


How it spent most of the winter.


Facebook Share    


-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline SlickS12

  • Sr. Member
  • ****
  • Location: Chandler, AZ
  • Posts: 1,235
    • http://www.facebook.com/#!/profile.php?id=504817996
Re: zastaba's erebuni s12
« Reply #1 on: 09:00:13 AM / 20-Mar-11 »
Nice.  It looks like someone has done a lot of work on this thing, a good place to start for sure!  Good luck on this one
'84 SRA VG Notch

yah, camber city called, they want you to run for mayor.
Canyon Roads...you go. Faster. And faster. And faster. And then you�re simply existing above an asphalt adventure.

Offline myth_S12

  • S12 Guru
  • *****
  • Location: San Jose, CA - Henderson, NV
  • Posts: 2,806
Re: zastaba's erebuni s12
« Reply #2 on: 03:44:58 PM / 20-Mar-11 »
Ohh, i remember this car. nice.

Offline D-sport S12

  • Sr. Member
  • ****
  • Location: Kelowna, BC, Canada
  • Posts: 1,072
  • Vehicle: 1986 Nissan S12
Re: zastaba's erebuni s12
« Reply #3 on: 08:42:19 PM / 20-Mar-11 »
Niiice, photoshoot if I come out to alberta this year?
Jesse R

Keichi Tsuchiya: "I'm afraid if I raced you on the street I'd push you to your death."


Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
Re: zastaba's erebuni s12
« Reply #4 on: 11:24:20 PM / 20-Mar-11 »
Wow that's beautiful, what are the wheel specs?

Moar picz!
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline sam31183

  • Dark Lord of The Drift
  • Moderators
  • S12 Guru
  • *****
  • Location: Long Beach Wa.
  • Posts: 8,461
  • Vehicle: 1985 Nissan 200SX
Re: zastaba's erebuni s12
« Reply #5 on: 12:33:43 AM / 21-Mar-11 »
this car is an icon.

Dave Coleman for President of Earth!!!!
Build Thread Hatch CA18DET Eventually a Track Whore
Build Thread Notch KA24DE Daily Driver

Quote from: Kustamogen
  haha me modding would be a disaster.....Id get all power hungry and  demand n00dz from everyone. Then make all the canadian s12er's come here  and massage my feet and make me jello pudding.

Actually....mod powers plz?!?!?!  0:)

Tedious?  This coming from a person who uses the word twice in a sentence?  I laughed repeatedly...


Offline methylprop

Re: zastaba's erebuni s12
« Reply #6 on: 11:09:30 AM / 21-Mar-11 »
I remember this car also 1 of my favorites.

Offline sideways_s12

  • CS12 OG
  • Moderators
  • S12 Guru
  • *****
  • Location: Las Vegas NV
  • Posts: 11,013
  • Vehicle: 1987 Nissan 200SX
  • Quit Fuckin around and start the car!
Re: zastaba's erebuni s12
« Reply #7 on: 11:19:04 AM / 21-Mar-11 »
Glad to see your gonna fulfill your promise and keep wrenching on it. What plans do you have for it any major mods you gonna do?

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
Re: zastaba's erebuni s12
« Reply #8 on: 12:05:28 PM / 21-Mar-11 »
Thanks for all the comments fellas.

Niiice, photoshoot if I come out to alberta this year?

Ya man - I'm down.

Glad to see your gonna fulfill your promise and keep wrenching on it. What plans do you have for it any major mods you gonna do?

Few things :yes: Have a safc I wanna put in it. Also have a t28 turbo I will pop in some day in place of the current t25. The body and fiberglass need some tlc - would like to touch up the body and give it a fresh coat of paint some day. Some after-market seats are in order. Wiring is sketchy in a couple places so I've got a buddy who's a guru and he'll help me out.

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline DjayS12

  • Sr. Member
  • ****
  • Location: Rimouski, Qc, Canada
  • Posts: 1,729
  • Vehicle: 1986 Nissan S12
Re: zastaba's erebuni s12
« Reply #9 on: 01:04:21 PM / 21-Mar-11 »
You know you're S12 woke up in me my love for the uber rare erebuni kit. And because you posted this I decided to try to track one... and I actually found one this morning! :P

Much luv! Keep this thing running and getting better!

Offline methylprop

Re: zastaba's erebuni s12
« Reply #10 on: 01:12:08 PM / 21-Mar-11 »
You should try to get that kit remade. I don't think a group buy would be too hard for this kit.

Offline DjayS12

  • Sr. Member
  • ****
  • Location: Rimouski, Qc, Canada
  • Posts: 1,729
  • Vehicle: 1986 Nissan S12
Re: zastaba's erebuni s12
« Reply #11 on: 01:56:42 PM / 21-Mar-11 »
Already planning about getting some molds for myselfs.. and why not share and sell them aswell. I would LOVE to find some side skirt tho.

I'm seing them being sold in the 2grands figure ;) KIDDIN :P

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
Re: zastaba's erebuni s12
« Reply #12 on: 03:13:59 PM / 22-Mar-11 »
... and I actually found one this morning! :P

Wow man that's lucky! I know there was some front and rear bits out there but a lack of side skirts. Even still it's a lucky find.

Problem with my car is that the whole kit has been molded into the car and would be a nightmare to remove. I would need a very convincing and serious person doing this before I would consider removing any part of my kit.

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline methylprop

Re: zastaba's erebuni s12
« Reply #13 on: 09:27:06 PM / 22-Mar-11 »
just make molds of it while it's on the car.

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
Re: zastaba's erebuni s12
« Reply #14 on: 12:43:37 PM / 15-Apr-11 »
Fixed couple of broken clamps on my charge piping and replaced a couple of pooched vac lines. She's running better then before.

Now I need to get my idle issue sorted. Can't wait to get her out on the road!  :devilsidesmile:

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline nismologist

  • S12 Guru
  • *****
  • Location: Sacramento,California
  • Posts: 3,541
    • http://
Re: zastaba's erebuni s12
« Reply #15 on: 12:50:19 PM / 15-Apr-11 »
zas, when do i get to buy this thing from you for pennys on the dollar? pics are essentially crack cocaine to this site, so start slanging em soon.

YOU THOUGHT SO, BUT I KNOW SO.
-Macho Man Randy Savage

Offline Arro

  • Administrator
  • S12 Guru
  • *****
  • Location: San Jacinto, CA, USA (951)
  • Posts: 16,885
  • Vehicle: 1985 Nissan 200SX
    • http://www.cardomain.com/id/arro200sx
Re: zastaba's erebuni s12
« Reply #16 on: 12:59:33 PM / 15-Apr-11 »
yah it's even white :P
-Jason Arro


'85 Nissan 200SX (KA24DE)
formerly,
'85 Nissan Silvia RS-X - FJ20 w/ dual Weber carbs
'84 Nissan 200SX Turbo
'85 Nissan 200SX Turbo
Drive it like you stole it, and work on it like you married it - self quote
Quote from: ka-t.org
Hella flush and all associates should be gunned down for brainwashing people into thinking a 225 and lots of camber is proper wheel fitment. THAT IS EASY, anyone can camber a skinny as tire till it dosnt rub. Now fitting an 11 with a 315 on stock fender with reasonable camber, that is fitment. And looks, and performs better than both.
i dont own a s12 at the moment but trying to acquire one to get rid of my s13 hatch
Quote from: SHOUTBOX
[27:54] zastaba: I had a friend touch the contacts on his distributer once
[28:04] zastaba: He did the super jumping up and down pain dance

Offline newby200sx

Re: zastaba's erebuni s12
« Reply #17 on: 01:58:34 PM / 15-Apr-11 »
looks real good bro goodluck!
Drifting is like my job, and I take my job seriously

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
Re: zastaba's erebuni s12
« Reply #18 on: 03:53:32 PM / 15-Apr-11 »
Haha thanks guys! When the weather here smartens up I will clean er up real good and take some nice pictars. Maybe even a vid too.

-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------

Offline zastaba

  • Full Member
  • ***
  • Location: Alberta, Canada
  • Posts: 805
Re: zastaba's erebuni s12
« Reply #19 on: 10:55:46 PM / 23-Apr-11 »
Been working on the car a bit. Now that the weather is nice I gave the rims a good cleanin.





Now I gotta keep working on the current project of swapping out my busted digi dash for an analog one. So far I got the battery, fuel and ignition sorted - but it's a bit of a mess lol.





-------------- [+_+] ---------------
----------My Erebuni S12----------
--My S12 Parts Sale [Ab]-[Can]
--
-------------------------------------