Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: Project: Fairlady Silvia - 1987 200sx SEv6...  (Read 89859 times)

Offline JonB

  • CONTRIBUTING MEMBER
  • S12 Guru
  • *****
  • Location: SW Pennsylvania
  • Posts: 2,587
    • http://
Re: Project: Fairlady Silvia - 1987 200sx SEv6...
« Reply #800 on: 04:00:48 PM / 12-Feb-19 »
What ignition is that? Module in the hei maybe.

Out of curuosity, what fuel regulator are you using?

Online Wonderingraven

  • The Ninja
  • CONTRIBUTING MEMBER
  • Sr. Member
  • *****
  • Location: Las Vegas, NV
  • Posts: 1,789
  • Vehicle: 1987 Nissan 200SX
  • The Drift Ninja
    • WRnet
Re: Project: Fairlady Silvia - 1987 200sx SEv6...
« Reply #801 on: 04:48:10 PM / 12-Feb-19 »
i am using something like so
https://www.aeromotiveinc.com/product/x1-series-carb-bypass/

The walbro would just lose the sound o operation with the pump and all pressure and all flow from the pump is gone and there is fuel in the tank alot of it, from all the mix reviews I am calling it, It's a walbro.

I was going to just order a super cheap early 90's TPI chevy intake fuel pump to just drop in. 

That is a Davis Universal Ignition (modified v6 msd street fire for vg motors)
1987 - Project: Fairlady Silvia
1986 - Project: Serenity (backup daily driven)
1986 - Project: Dread Pirate Robin
wonderingarven.net

Offline JonB

  • CONTRIBUTING MEMBER
  • S12 Guru
  • *****
  • Location: SW Pennsylvania
  • Posts: 2,587
    • http://
Re: Project: Fairlady Silvia - 1987 200sx SEv6...
« Reply #802 on: 09:11:45 PM / 12-Feb-19 »
I suspect thats a bad module and not the carb doing that. I could be wrong tho.

Online Wonderingraven

  • The Ninja
  • CONTRIBUTING MEMBER
  • Sr. Member
  • *****
  • Location: Las Vegas, NV
  • Posts: 1,789
  • Vehicle: 1987 Nissan 200SX
  • The Drift Ninja
    • WRnet
Re: Project: Fairlady Silvia - 1987 200sx SEv6...
« Reply #803 on: 05:12:43 PM / 19-Apr-19 »
been a while to really update this project.
I ran out of gas completely causing when I attempted to start it a massive ping.

I scored a pair of heads from someone locally with 276 cam with both exhaust and intake bolts clean with no stripped threads.
I am going to replace the current set that has a bad / bandiaded head.

with that I am going to do a gasket refresh, oil, hoses, and such.
« Last Edit: 05:13:11 PM / 19-Apr-19 by Wonderingraven »
1987 - Project: Fairlady Silvia
1986 - Project: Serenity (backup daily driven)
1986 - Project: Dread Pirate Robin
wonderingarven.net