Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: HPG Catbackish exhaust for under $300  (Read 1126 times)

Offline Justified503

  • n00b
  • **
  • Location: Happy Valley, OR
  • Posts: 69
  • High Point Garage
HPG Catbackish exhaust for under $300
« on: 05:49:04 PM / 27-Feb-14 »
This is going to be a very simple post!

Who here would like a semi catback exhaust shipped to their house for $300 dollars or under?

Im considering making a catback exhaust that doesn't really bolt up to the factory location. 
Main reason for this is,  Who has the factory setup anyways.

You would need to make your own mid pipe section, but this would allow you to adapt it any different way, for any engine swap you may have.

It would be a simple 2.5in 2bolt universal flange to 2.5in SS 16g piping all the way out the rear bump with either 2.5in exiting or 3in section. Your choice

Just made this the other night for a BMW E30 325e



The turn down was an added extra little bit.

These would be sold for $250 + shipping.

Thanks Justin R
High Point Garage



Facebook Share    


Offline 8SixS12

  • Get it done already!
  • Full Member
  • ***
  • Location: Birmingham, AL
  • Posts: 612
  • Vehicle: 1986 Nissan 200SX
Re: HPG Catbackish exhaust for under $300
« Reply #1 on: 08:38:28 AM / 02-Apr-14 »
Sounds good but what about the turbo guys?  3 inch?
"Sense is not always common" -self quote

My Build Thread: http://club-s12.org/retro4/index.php?topic=36053.0

Offline Justified503

  • n00b
  • **
  • Location: Happy Valley, OR
  • Posts: 69
  • High Point Garage
Re: HPG Catbackish exhaust for under $300
« Reply #2 on: 01:32:42 AM / 19-Oct-14 »
Hey guys, so I'm in the process of build a catback exhaust for a fellow s12 owner. I'm going to be building it out of 2.5in mild steel from the catalytic converter all the way back to a HPG Blast Pipe of your choice.

Pricing will be $250+shipping.

http://highpointgarage.bigcartel.com/

Go check out my website to see what options you could choose from for your Blast Pipe

I will have it jigged here in a couple weeks and posted on my site.

If you have any questions, feel free to email me

highpointgarage@gmail.com

Thanks
Justin R.
HighPointGarage


Offline 8SixS12

  • Get it done already!
  • Full Member
  • ***
  • Location: Birmingham, AL
  • Posts: 612
  • Vehicle: 1986 Nissan 200SX
Re: HPG Catbackish exhaust for under $300
« Reply #3 on: 10:40:35 PM / 19-Oct-14 »
Looks good! This is exactly what I would have done if I could weld. The slanted tips are a nice touch. I'll hit you up when I start working on the 12welve again.
« Last Edit: 10:42:10 PM / 19-Oct-14 by 8SixS12 »
"Sense is not always common" -self quote

My Build Thread: http://club-s12.org/retro4/index.php?topic=36053.0