Wheel Spacers and Centric Rings and Hub Bore

[Clust96]

Im getting a set of 15x7 +35 4x100 wheels. And I am getting 1" spacers for the front and 1.25" for the rear. These spacers also change the bolt pattern from the stock 4x114.3 to 4x100.

Now for the question...   I do not know what I need as far as center bore and if i need centric rings. I know the wheels im getting have a bore of 67.1mm. But what is the stock hub bore?

Any help is really appreciated. Thank you!

[pakii-afa]

i think the stock s12,s13,s14 hub are 66.1mm
centric rings may not be required but are definitely made by anybody.

heres the first ebay link i came up with on google.

http://www.ebay.com/itm/67-1mm-66-1mm-HUB-CENTRIC-RING-ALUMINIUM-INFINITI-NISSAN-CIMA-KUALIS-ELGRAND-E51/221496216977?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D23928%26meid%3D8490696232640960068%26pid%3D100011%26prg%3D10200%26rk%3D1%26rkt%3D10%26sd%3D280978965919

what you should also look into is the place youre getting your spacer/adapters from as some companies can make specific hub bores for you so you dont require buying them at all, you should also consider what the spacers/adapters hub bore is as well.

[spiderwebfx]

You should be able to get adaptor spacers specifically suited for Nissan that do that bolt pattern change.  That way you'll only need a hub-centric ring when putting the wheel onto the spacer.