Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: Installing Silver Top CA20E A/C into Black Top CA20E  (Read 431 times)

Offline tgposkitt

Installing Silver Top CA20E A/C into Black Top CA20E
« on: 03:01:34 AM / 29-Dec-19 »
I'm considering installing an A/C system from a post 02/86 XE which came with a silver top CA20E with ribbed accessory belts into my '84 black top CA20E with v-belts. I would have to swap out the ribbed pulley and clutch from the compressor for v-belted ones, and a matching tensioner pulley for a v-belted one. Has anyone done this before? And, are there cars that share parts with the '84 A/C compressor system?

Facebook Share    


Offline JonB

  • CONTRIBUTING MEMBER
  • S12 Guru
  • *****
  • Location: SW Pennsylvania
  • Posts: 2,614
    • http://
Re: Installing Silver Top CA20E A/C into Black Top CA20E
« Reply #1 on: 09:47:08 AM / 29-Dec-19 »
I have no idea. I think i have the compressor for the ca20 black 1984. And one from a dr30 there too. Not sure i can id which is which.

Offline weitrhino

  • Full Member
  • ***
  • Location: El Paso
  • Posts: 495
  • Vehicle: 1985 Nissan 200SX
  • '85 Notch just cracked 46k miles! RIP '86 Notch
    • Blue Mouth Promotions LLC
Re: Installing Silver Top CA20E A/C into Black Top CA20E
« Reply #2 on: 12:08:46 PM / 29-Dec-19 »
The 84 had a different compressor model even though it looks physically identical to the later version. The main difference is the high pressure and low pressure sides are opposites. You’d need to account for that. Two years ago I rebuilt the system in my 85. It had a dealer installed A/C system - not factory installed - and they used an 84 compressor.  You can read more about my process below.


https://club-s12.org/forum/index.php?topic=38453.0
« Last Edit: 12:16:49 PM / 29-Dec-19 by weitrhino »

Offline tgposkitt

Re: Installing Silver Top CA20E A/C into Black Top CA20E
« Reply #3 on: 12:35:54 PM / 29-Dec-19 »
I'm actually installing a dealer installed A/C kit for 1986.5-1987 CA20E into my 1984 CA20E without A/C installed. I've been told that it mounts straight up and the only difference is the compressor pulley type.

Is it possible to swap the clutch/pulley assembly from the A5000 v-belted model to the MJS170 ribbed belted?

The 84 had a different compressor model even though it looks physically identical to the later version. The main difference is the high pressure and low pressure sides are opposites.

Did your A5000 require a v-belt?
« Last Edit: 01:09:26 PM / 29-Dec-19 by Han Zhang »

Offline weitrhino

  • Full Member
  • ***
  • Location: El Paso
  • Posts: 495
  • Vehicle: 1985 Nissan 200SX
  • '85 Notch just cracked 46k miles! RIP '86 Notch
    • Blue Mouth Promotions LLC
Re: Installing Silver Top CA20E A/C into Black Top CA20E
« Reply #4 on: 08:48:03 AM / 30-Dec-19 »
I can’t answer if the clutch is swappable because I don’t have both compressors to compare. I’m also out of state for a while and can’t look to verify but I’m 99% certain the A5000 runs a V-belt. Make that 99.99%. It should mount exactly the same though.

Get a green O-ring kit compatible with R-134a and convert the valves right off the bat. No sense trying to use the more expensive and increasingly rarer R-12.

Where did you find a dealer A/C kit?
« Last Edit: 09:15:34 AM / 30-Dec-19 by weitrhino »

Offline tgposkitt

Re: Installing Silver Top CA20E A/C into Black Top CA20E
« Reply #5 on: 01:56:45 PM / 30-Dec-19 »
I found it on one of the Facebook pages. The seller wants $300, how much do you think it's worth?

Offline weitrhino

  • Full Member
  • ***
  • Location: El Paso
  • Posts: 495
  • Vehicle: 1985 Nissan 200SX
  • '85 Notch just cracked 46k miles! RIP '86 Notch
    • Blue Mouth Promotions LLC
Re: Installing Silver Top CA20E A/C into Black Top CA20E
« Reply #6 on: 02:29:41 PM / 30-Dec-19 »
Oh, I think I’ve seen it but don’t know what all it contains. If you follow the link I posted above it outlines all the parts in the system.  If you live in a hot area it may we’ll be worth it for a new compressor and condenser. Of course, you’ll still have to vacuum and charge the system.