Club-S12 International S12OC United Kingdom ClubS12 France S12Silvia Australia S12.org.ua Eastern Europe S12 of Sweden S12 Japan BBS
Please login or register.

Login with username, password and session length

Author Topic: Koni Shocks Rear and Front  (Read 114 times)

Offline Jibnome

  • n00b
  • **
  • Location: Germany
  • Posts: 5
Koni Shocks Rear and Front
« on: 12:06:43 PM / 03-Jan-21 »
So I've recently swapped my shocks for Koni Yellows both front and rear. In the rear i went for the z31 ones (part nr. 26-1248SPORT) as it's commonly known that they will fit.
However I haven't seen anyone ever mention the ones I used in the front, which will fit with just one very minor adjustment. The shocks are originally for the Audi 80 (part nr. 86-2066SPORT).
They will drop in the stock strut tube perfectly and have almost the exact same length. You'll only have to bore out the hole for the thread of the shocks to 14mm.

Facebook Share    


Offline weitrhino

  • Full Member
  • ***
  • Location: El Paso
  • Posts: 526
  • Vehicle: 1985 Nissan 200SX
  • '85 Notch just cracked 46k miles! RIP '86 Notch
    • Blue Mouth Promotions LLC
Re: Koni Shocks Rear and Front
« Reply #1 on: 02:23:19 PM / 03-Jan-21 »
Any pics of the front end shock mod you made?

Offline Jibnome

  • n00b
  • **
  • Location: Germany
  • Posts: 5
Re: Koni Shocks Rear and Front
« Reply #2 on: 08:39:58 AM / 08-Jan-21 »
Id love to but i cant find out how to post pictures.

Offline iceageg

  • Full Member
  • ***
  • Location: Denver, CO
  • Posts: 646
Re: Koni Shocks Rear and Front
« Reply #3 on: 01:34:08 PM / 08-Jan-21 »
On this site you need to use a third party hosting site like imgr.  Post your picture there then link it back here using the helpful buttons above the text field.
I was afraid all the five gallon buckets of pain stacked four high were going to fall over